Natrix truck and loader on a job site

Concrete guide · Natrix Materials

What is a short-load fee on concrete delivery?

Why small concrete orders often cost more than the concrete in them, and how to avoid paying for a full truck you don't need.

  • 2 min read
  • 6 sections
  • Updated

The short answer

A short-load fee is an extra charge many ready-mix suppliers add when an order is below their minimum load. A drum truck costs about the same to batch, send and clean whether it's full or not, so small orders carry the difference. Volumetric delivery doesn't need one: Natrix mixes at your pour, charges no short-load fees, and bills for what's placed.

General guidance. Your plans, engineer and local code set the mix, thickness and reinforcement for your pour.

Natrix volumetric truck pouring a crosswalk while the crew finishes the concrete
Small and staggered pours, like this crosswalk, are where volumetric delivery helps most.

Order a yard or two of concrete from a drum truck and the bill can surprise you. Often the concrete isn't the expensive part. The short-load fee is.

What a short-load fee is

Ready-mix suppliers send concrete in drum trucks sized for full loads. When an order falls below the supplier's minimum, many add a short-load fee on top of the price per yard. The fee is meant to cover the cost of sending a truck that's mostly empty.

Each supplier sets its own minimum and its own fee, so ask before you book.

Why suppliers charge it

A drum truck costs about the same to batch, drive, unload and clean whether it carries a full load or a fraction of one. The driver's time, fuel and the trip to your site don't shrink with the order. The short-load fee passes that fixed cost on to small orders.

Pours that often run into it

  • Fence and deck post holes
  • Equipment and HVAC pads
  • Small slabs, walkways and patios
  • Footings for additions, sheds and garages
  • Curb, sidewalk and driveway repairs
  • Sites with several small pours spread over a day

Other small-order costs to ask about

A short-load fee isn't the only line that can add up on a small pour. When you compare suppliers, ask how they handle:

  • Waiting time if the crew or the forms aren't ready
  • Concrete left over in the drum after the pour
  • A second trip if the first load comes up short

How volumetric delivery avoids it

A volumetric truck carries the materials separately and mixes at your pour, only as much as the pour needs. Because nothing is batched in advance, there's no full load to fill. That's why Natrix Materials charges no short-load fees, and you pay for what's placed.

It also takes the guesswork out of small orders. If the pour needs a little more than you planned, the truck keeps mixing from the materials it carries. If it needs less, it stops.

Planning a small pour

Source: Natrix delivery terms as published on natrixprecast.com/concrete. Supplier minimums and fees vary, so ask each supplier for theirs.

FAQ

Common questions

What counts as a short load of concrete?

It depends on the supplier. Each ready-mix supplier sets its own minimum load, and orders below it may carry a short-load fee. Ask for the minimum and the fee before you book.

Does Natrix charge short-load fees?

No. Natrix Materials delivers by volumetric truck, mixing at your pour, so there are no short-load fees and you pay for what's placed.

How do I avoid a short-load fee?

Either combine small pours into one order that meets a drum truck's minimum, or use volumetric delivery, which mixes only what the pour needs and has no short-load fee.

What small jobs is volumetric delivery good for?

Post holes, pads, footings, repairs, small slabs and sites with several small pours. Book a delivery window online or call (360) 852-6473.

Ready to pour? Book a delivery window.